The standard clear vinyl ID badge holders that have been trusted by millions of people all around the world are almost legendary; flexible classic with simplistic features, giving each customer the ability to customize their relation with their badge holder to accommodate their needs. Coming in both vertical and horizontal designs, these are some of our most popular badge holders, because they’re functional, lightweight, and they protect your ID badge from wear and tear. Simply slide your standard credit card sized id card (maximum card dimensions: 2 21/64” H x 3 3/8” W (59 mm x 86 mm) into the holder and your card will remain locked in place and fit snug and sturdy.
With some badge holders, you aren’t given much of an option for attachment types, but with these vertical and horizontal vinyl badge holders, you have three options you can choose from for your preferred attachment. The importance of this should not be overlooked, because everyone that uses a badge holder will have a wide range of unique needs which factor into their specific placement for their ID badge holder, and the ability to get the badge reel to work along the grain of your work as oppose to against it, is a key factor to consider when choosing the proper option for you. Therefore, the great thing about the 1820-1050 (Vertical) and the 1820-1000 (Horizontal), is that you can attach them to either a lanyard, badge reel, or you can utilize the two holes offered on the side for a neck chain. Read the rest of this entry »
We have 14 different types of credential ID Badge Holder Neck Wallets for you to choose from, and if you need some help navigating which one would be best for you or your company, please continue reading the article below, or if you’d rather just visit the selection, then click here.
Wallets are an important part of your life, because they are one of the few essential items you always carry with you. Neck wallets in particular are a great way to carry your ID cards and credentials, and everything else you need to your next meeting, convention, or trade show. They also work great for bus and rail pass holders, or for carrying travel documents on the road.
Hey guys, this is Mike from Specialist ID! I wanted to let you know that we’ve recently stocked up on some legendary T-Reign Outdoor Retractable Gear Tethers, and we are really excited about this product because it is manufactured in the USA by the originator of the self retracting gear holder. These Retractable Gear Holders were specifically designed to help you explore the wilderness’s of the world while keeping your gear right where you need it, when you need it most. We currently stock six different products from “The Outdoor Series”, with three different attachment types, under two different categories of strength; Original and Heavy Duty. Read the rest of this entry »
We’ve got a sweet collection of Color Coded Rigid ID Badge Holder’s in stock, and they come in seven different colors, giving you an opportunity to match your badge holder with your favorite Lanyard or Badge Reel. Starting at $0.69 ea colored badge holders are an efficient and affordable way to quickly ID personnel. Unique at specialistid.com, you can buy just the quantity you need, because we wont place a minimum on your order, and if you spend more than $50.00 worth, we’ll ship it to you for free. You may want 10 for your employees in blue and 5 for your contractors in red; however you mix and match we got you covered. Read the rest of this entry »
Witz Waterproof Cases and ID Badge Holders are made for people looking for an adventure, but most importantly, they’re engineered so that their users can trust their documents will be protected while they’re doing things like jumping out of airplanes, scaling mountains, riding violent water rapids, hiking through jungles, woods, and deserts, or whatever else you need to do to feed that wild sense of adventure in you. They key to the success of the Witz Waterproof Cases and ID Badge Holders are in the details; they are constructed from crush resistant ABS plastic, among the toughest materials in the industry, and have rubber O – rings to keep water and dirt away from your stuff. You can use these Witz Waterproof Cases and ID Badge Holders for ID cards, passports, cellphones, tickets, or any other portable valuable within your possession, and you can just hang them around your neck from your neck lanyard and trust they’ll be tightly clipped in by your trusty carabiner, or keep them in a bag.
If you are looking to purchase SkimSAFE RFID blocking holders online, please see our SkimSAFE product page here. If you would like to find out more about these tough Made in America, FIPS 201 holders, please read on.
Here in the 21st century, we are more susceptible to thievery than ever before, and if you value your privacy, and do not want your sensitive information to be easily accessible by RFID technology, the SkimSAFE Shielded ID badge holders are great way to achieve the security you are looking for. While taking your card out of the holder to read your card may seem like an extra step, the security trade off may be well worth it. The SkimSAFE card holders make it easy to slide your card partially out of the holder, read the card, and then just slip it back into place where the card locks in tightly.
The single Card RFID Blocking ID Card Holder (AH-200 or 153095BLU) accommodates one standard credit card sized RFID card, with the front of the card remaining visible. This item is important for people needing to secure their information, because the Shielded Blocking ID Card Holder blocks any unwanted communication both to and from the card while the card is in the SkimSAFE Shielded RFID Blocking ID Card Holder, preventing the information on your card’s chip from being read by an unauthorized RFID reader. (see this article about RFID skimming)
Bright enough to see in the dark, secure enough to take with you in the water, and malleable enough to roll onto your wrist or ankle, the wrist key chain ID holder with a Green Coil is best suited for people on the go. This lightweight, flexible, expandable wrist coil ID holder with a key ring is great for keeping a photo ID or key handy and secure on your wrist, or using with your POS/Swipe Card Reader system. At $0.79, the wrist key chain is offered with no minimum order, so you can buy exactly the quantity, without any waste, at a price that’s right.
This wrist key chain ID holder with a green coil is useful for going on a jog without pockets, a trip to the beach, and if you roll it up onto your arm it’ll even be unobtrusive when driving a car. It’s also great for waiters and waitresses who frequently swipe their card every time they put in a new order. This wrist key chain ID holder will accommodate your active lifestyle when you need your card close to you at all times. Our wrist coil ID holders are one size fits all and will fit just about anybody’s wrist or ankle, so you don’t have to worry about ordering the wrong size. Read the rest of this entry »
By special request, we have brought in the S2204 dual strap, strap clip, and made it available with no minimum order online. The S2204 two strap clip is a neat item for anyone that needs to hold multiple ID cards but does not use a badge holder. Also, with this dual strap clip, it is possible to have two cards on one clip and have both cards mostly visible.
Our customer had a unique use for this strap clip that worked out great. They needed to display a badge buddy, yet also use a vinyl badge holder for their ID. Without this clip, the badge buddy would have been covered up.
The alligator clip easily attaches firmly to most articles of clothing, lapel or bag, making it a simple attachment for most uniforms and accessories. The straps will fit any standard slot punched ID card or any slot hole in any standard ID badge holder.
If you were issued an ID badge it is safe to assume that this badge is of some level of importance, if not very important. Many companies have opted to use ID badges and access cards as a way to either identify company personnel and differentiate those belonging to the company and visitors and/or to access doors, computers and more. Not only are ID badges used to identify those that work for a particular company, they are also used to identify different departments within a company. ID badges create an order and offer safety to companies, schools, hospitals, etc. The use of these badges allows personnel to identify who belongs where and when, and what access they should have. The absence of identification can create chaos that would otherwise be easily avoidable. Imagine if anyone could stroll in and out of our schools and businesses unidentified. You can already see the potential mayhem. So, it’s established, the use of proper identification is a great thing. The issue now would be keeping up with the identification cards once they’re issued. Read the rest of this entry »
Our single, rigid ID card holder (AH-075), and the dual rigid ID card holder (AH-150), are a popular choice with the military, and other organizations that need a rigid, versatile holder that accommodates one or photo ID badges. Much of its popularity with the military, is its dark black color which looks good with any of the military uniforms, and does not attract attention to the badge holder. The light weight and great price are two other qualities that make this holder so popular.
The AH-075 and AH-150 both have slot holes on both sides, allowing you to hang your ID either vertical or horizontally, which makes this rigid card holder quite versatile whether you have a portrait or landscape ID design. Your ID badge locks securely in place, although the badge is still easy to insert and remove.
Any questions about photo ID Systems or accessories? Just contact us online or give us a call at 1-800-380-6726.
The standard clear vinyl ID badge holders that have been trusted by millions of people all around the world are almost legendary; flexible classic with simplistic features, giving each customer the ability to customize their relation with their badge holder to accommodate their needs. Coming in both vertical and horizontal designs, these are some of our most popular badge holders, because they’re functional, lightweight, and they protect your ID badge from wear and tear. Simply slide your standard credit card sized id card (maximum card dimensions: 2 21/64” H x 3 3/8” W (59 mm x 86 mm) into the holder and your card will remain locked in place and fit snug and sturdy.
